DD-6000 type

Configuration parameters of DD-6000 spray paint room
Outer diameter of atrial body
7000 x 5300 x 3300mm (L x W x H)
Inner diameter of the body
6900 x 3900 x 2500mm (L x W x H)
Big       door
 
1. The glass door is made of built in framework, beautiful and durable. The glass door is used for luxury bolt, square tube guide column and aluminum alloy hinge.
2, sealed slot box with special sealant;
3, door hole size: [wide * high] =3000 x 2480mm;
Working door
1 sets, size: 700 x 1800mm (W x H), luxurious glass door, supporting pressure lock and glass observation window; prevent room pressure more than normal value and damage to the roast room, safe and durable.
Room       body
1, the wall board adopts the socket type fireproof rock wool compound plate, the socket adds the steel strip seal, enhances the compression strength, the outer side covers the special safeguard.
The film is designed to improve corrosion resistance and rust resistance, extend service life, thickness 50mm, and =0.5mm steel plate inside and outside.
2, filling: fireproof rock wool and rock wool bulk weight of 120 kg.
3, the roof of the house is made of 0.8mm galvanized steel plate, which has excellent fire protection effect.
4, the housing frame is made of galvanized steel bending, and the sealing effect is good.
      station
1. The platform is made of galvanized steel sheet punching, machine pressing, molding and galvanized square pipe assembling, with high 300mm, installation specification, solid and durable.
2, the middle configuration three floor grille, two skateboards [or two grille, three skateboards], the structure is reasonable, durable.
3. Adopt mechanism press welding geogrid 30 x 5 flat steel to ensure load bearing, galvanizing and rust treatment.
4, the bottom of the pattern plate is welded with reinforcing bars, and the operators are comfortable to operate.
Exhaust air
Line      
1. The fan box and the main building body are separated structures, greatly reducing the vibration and noise of the housing.
2. The fan box is made of sprayed profiles and steel plates with external protective films to improve corrosion resistance and rust resistance and prolong service life.
3. The size of the fan box is 4400*1300*3200 (L*W*H), and the super wind box can fully meet the intake and exhaust requirements of the barn.
4, the high position air supply unit greatly improves the efficiency of fan air supply.
5, the air supply unit adopts 2 sets of Jiangsu Heng Kang double inlet centrifugal fan. Fan type: YDW-4.5M; single power: 3KW; single air volume of 10000 /h, total air volume 20000/ h;
6. The air exhausting unit uses 1 European high pressure fans. Fan type: DDF; single power: 7.5KW; air volume 30000/ H.
Exhaust pipe
Reference       number
1. The exhaust pipe is made up of flanges made of high quality galvanized steel sheet and professional equipment.
2, the total number of exhaust pipes: vertical 15 meters (including rain cap) 600mm spiral air duct.
heating system
Equipped with 8 sets of luxury nano radiation heater, each 3 kilowatt x 8=24 kilowatt, (high heating safety coefficient) use high temperature resistant wire. The maximum working temperature is 55 C, and the thermal efficiency is up to 98%.
Filter system
1. Air inlet primary filtrationFor technical production in Italy, we can effectively capture dust particles larger than 10um.
2, top efficient filtration, for Holland technology production, can efficiently capture more than 4um dust particles, the capture rate up to more than 99%, embedded filter cotton bracket (highly efficient, easy to replace filter cotton).
3. The bottom of the barn is laid with glass fiber bottom cotton to absorb the dust and particulates in the paint.
Environmental protection device
1. The super large environmental protection box contains a layer of glass fiber bottom cotton to adsorb the dust and particulates in the paint mist.
2. A special honeycomb activated carbon with a thickness of 50mm is arranged in the middle of the environmental protection box to adsorb benzene series compounds in the exhaust gas.
3, using high energy and high efficiency magnetic UV light oxygen to catalyze the treatment of exhaust gas, thus producing ozone molecules, completely decomposing the high molecular compounds in the exhaust gas, and transforming into low molecular compounds, carbon dioxide and water, and the emission of exhaust gas to the national standard of the comprehensive emission standard of atmospheric pollutants (GB16297-1996).
Lighting
Ceiling lamp 8 group x 3 =24 branch * 16W, LED high efficiency energy saving lamp tube, lamp tube transverse, illumination: more than 800LUX
Electronic control system
Luxury distribution box is equipped with: overtemperature alarm, lack of protection, thermal overload protection, time setting, temperature setting, spray paint, baking paint, lighting, power supply, emergency stop switch and so on.
No-load wind speed
More than 0.3m/s
Electric       source
380V/3 phase /50HZ
Maximum temperature
Working temperature 55 centigrade
Total power
45KW
      color
Optional: sea blue, red, orange, white, etc.